my500e CONNECT

The best solution to bring you back the features

of the Fiat Access/Uconnect app and more!

Works independently from the manufacturer

in Europe, USA, Canada and all over the world.

(Available only for the 2013-2019 Fiat 500e)

Screenshots, including options shown only available with the Prime-Edition


The status display gives you an overview of the current battery capacity, estimated range, charging and door-lock status. In addition, current mileage and the two trip counters can be displayed.

Just one click lets you activate vehicle pre-condition, unlock & lock* the doors and activate charging.

The Prime-Edition additionally monitors and displays the 12V battery and the optional GPS module lets you locate your vehicle.


Precondition with timer: select the time of day, weekdays and whether your Fiat 500e should be connected to the charger in order to be activated. 

The activation takes place independent of a connection to the smartphone to make sure the function is also available in garages with poor / no mobile phone reception.

Three timers are available so you can sit in a comforting vehicle virtually anywhere at any time and benefit from a better range in winter thanks to the simultaneous preconditioning of the battery.


Program the vehicle's built-in charging timer conveniently from your smartphone.

With Prime-Edition, you can set a day dependent charge limit to save the life of the HV battery.


In addition to the basic functions units, language and time, you can specify the desired minimum battery capacity and range, so you'll never find a perfectly preconditioned Fiat 500e with an empty battery.


With Prime-Edition you can activate the charge status notification by email and the Remote-API which allows you to access the my500e Connect functions with your own software. Owners of a 2016+ Fiat 500e can also edit the vehicle settings via the app.




Cellular (4G/LTE)


Out of production


Cellular data included for intended use, you will receive a warning if your data volume exceeds normal usage, roaming charges may apply if the device is used outside of the registered country.


**       only available on vehicles 2016 and up

***     API definitions available for registered customers upon request

****   only available for modules with the optional GPS receiver

***** only for cellular devices


The telematics module will be registered to the vehicle & country, the following coverage is available: 

North America (4G/LTE):

USA, Canada, Mexico


Americas & AU (4G/LTE): Australia, South America, etc. (Details)


EU/Asia (4G/LTE): 

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Great Britain, Guadeloupe, Hungary, Ireland, Iceland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sweden, Slovak Republic, Slovenia, Spain, etc. (Details).



All modules are only offered to our local Fiat 500e buyers.


Only 2.4 GHz is supported, make sure it's enabled in your router!


Plug&Play - the my500e module can be easily mounted underneath the dashboard and gets plugged into the OBD diagnostic port, done!

An average skilled handyman will  need 5 minutes, otherwise your local repair shop will gladly install it for you.


The device is sold as a hobbyist electronics kit but does include a warranty of 12 months.


Operation is via a web app - no installation necessary and automatically always up to date!

Wi-Fi Setup-App

Only needed to set the Wi-Fi device up!


The available API makes it possible to create your own app or extension.

Design and functions may differ from the illustrations as the product is constantly evolving.

Our customers say:

"Especially on colder days it is a real joy to enter
my pre-heated Fiat 500e in the morning."

Michael S.

"Finally! I've been waiting for a long time to be able to check my 500e's remaining range on my smartphone.

Remote preconditioning was perfect during summer with very high temperatures"

Daniela M.